BEKO TECHNOLOGIES已经在压缩空气冷凝管理方面建立了业务，即排水和分离。 BEKO TECHNOLOGIES今天还有更多的事情要做，但是业务始于冷凝液和高效的排液和法律配置。
This is not a glamorous business. The BEKO TECHNOLOGIES sales and service staff may hear expressions of pride and satisfaction about a new compressor or the energy saving performance of a dryer or intelligent control system but who ever got excited about his new condensate management system, until there is a problem that is. Chris Norris UK Service
Manager at BEKO TECHNOLOGIES says;
可悲的事实是，凝管理层对箱滴答声。 本厂工程师有许多问题，事情出问题，改进和成本节约和凝析油的管理是什么，他只是需要做，没有选择，没有重大利好，他的部门的运行方式（当然好处是给我们所有的条款保护环境）。 于是，他已经购买并安装了一个单位，他现在想忘记它。
“可悲的是不可能。 水含有不能通过常规过滤去除的细菌。 细菌在正常条件下快速繁殖，每毫升1细菌生物将在一个工作班内生长超过1,000,000菌落形成单位！ 细菌也会产生粘液，可以产生自己体积的100倍。 所以很明显，如果不加以控制，这将成为一个严重的问题。 其结果可能是在一些低成本的系统中，该装置似乎在工作，但过滤器效率低下，并且含有太多油的凝结物将进入排水管并污染我们的水资源。 可以征收重大罚款。 另一种可能性是装置将不再能够流动冷凝物体积并溢出。 这是不可容忍的，但至少凝析油没有到达地下水位和河流，工程师有一个信号表明行动必须发生。“
BEKO TECHNOLOGIES have solutions for these scenarios as befits a market leader. When purchasing a condensate management system BEKO TECHNOLOGIES strongly advise users to think about their situation, type of oil, local contaminants will be known and if there are any doubts BEKO TECHNOLOGIES will analyse a sample of condensate as part of the service thus enabling a definitive comment on the type of management system required. It is well known that the printing industry as one example and because of the volatile organic compounds used will not normally have condensates which will separate i.e. they will remain in colloidal suspension. These systems will require a splitting system which introduces a material which will “split” the oil by combining with it and being easily removable in that combination. This is the BEKOSPLIT product which is well proven for difficult condensates over many years.
BEKO TECHNOLOGIES have also developed a system which can overcome the issue of blocking and blinding by forcing flow using a pump system. The Flow control Device uses BEKO TECHNOLOGIES’s proven level sensor technology to measure the condensate level within the OWAMAT. Once the preset level is reached the Flow control unit pumps condensate through the OWAMAT filter and out to drain. The flow control system overcomes the problem of slime blocking the filter sets. This problem of slime will affect all brands of oil and water separators which have the relevant bacteria present in the condensate. BEKO TECHNOLOGIES have seen this on a number of sites with other manufacturers’ equipment. BEKO TECHNOLOGIES have addressed the problem and are the only condensate management manufacturer who has solutions.